Coffee Outside in PDX gets a little more special this week.

Portland bikey peeps — Coffee Outside will meet up at Lords Luggage this Saturday, not a typical park locale but in support of a local artisan who makes bags for bikers, walkers and other Portlanders and is throwing a party to celebrate Portland maker culture.

Starts at 9am. Bring your own coffee fixings, pastries and fun. And stay for the party.

Bike Happy Hour, and then some

I enjoyed a nice ride to Bike Happy Hour this evening. Saw some friends, met some nice new people, did the bikey love thing, and everything was great.

Then came the Open Mic, where folks in attendance can get up and make announcements about upcoming events (mostly bike related but not absolutely required). One of the speakers was a fellow who decided to use his turn at the mic to speak out against “the genocide in Gaza,” and then urging everyone present to do the same. He also informed us that he has lobbied local transportation-oriented nonprofits like Street Trust and Bike Loud to issue statements condemning “the genocide in Gaza,” as if these decidedly local transportation-oriented nonprofits could effect any meaningful difference either way — or should.

I felt slightly uncomfortable. Then, the Bike Happy Hour host gave this man a big hug and the assembled crowd applauded, and I felt a little more uncomfortable.

Here’s why.

At bicycle-centric gatherings such as this, I’ve never heard anyone come out this boldly against genocide against any other group of people — in Somalia, Sierra Leone, or Anywhere else. In fact, the current climate seems to be quite open to statements about this particular conflict — which, lest we forget, began with an attack on October 7 of last year that was apparently months or even years on the making. The level of outrage about the attack against Israel never seemed to achieve the same volume, the same fevered pitch, or the sustain, from the general public as the Israeli government’s decision to retaliate against Hamas. Then, there was a lot of cry and hue against Israel, and against Jews (whether Zionist or not) from multiple sides.

While I am well aware that there is a lot more support for Palestinians than for Jews in a lefty town like Portland, finding this vibe at a bicycle-oriented event was really disappointing for me. Was I surprised? I guess not entirely. But yeah, I was disappointed. Was I nervous? I don’t know. I felt kind of alone. And of course, I suppose I would feel that way in this particular context. 

Jews are not a huge subgroup here. And over half of Portland’s Jews are not affiliated with any Jewish institution. For some, the cost of admission is too high (though synagogues have come a long way since the 1970s, and nearly all of them are willing to work with someone on a tight budget). For others, they don’t feel a big pull towards organized religion. And for the rest, they see their Jewish identity at best as a thing that doesn’t matter much, and at worst a thing to be played down in favor of assimilating. Jews as a group are hardly monolithic. 

As someone who did not grow up in a Zionist home and whose connection to Jewish communal life was almost nonexistent until adulthood, I struggle with how I feel about Israel for lots of reasons. But at this present time, with college campuses up in arms and too many refusing to make a distinction between Israelis, Zionists and Jews because nuance is too hard, yeah. I felt alone and a little nervous. I’m not sure I can feel any other way at this time or in this place.

And mostly I felt so alone because I didn’t expect global politics to enter a chilled-out, bicycle-oriented space so selectively. 

I stayed for a few minutes after the Open Mic period was over, then said my goodbyes and left. 

I felt sad and annoyed and nervous all at the same time. The ride home helped a little. But only a little.

I don’t know if, with all my health issues and everything else going on, I feel like expending much more energy on this. But I felt like it was important enough to warrant a mention here. 

Bike Summer 2024: Coming soon to a Portland near you

Bike Summer begins in June, with a kickoff ride on June 1 at the North Park Blocks. Check out the Pedalpalooza calendar here:

https://www.shift2bikes.org/pedalpalooza-calendar/

Bike Summer merch is available for pre-order here:

https://www.shop.rendered.co/pedalpalooza

Portland is a great place to ride a bicycle. There are events being added all the time. And join me and a bunch of bike-loving folks at the opening ride.

Clean getaway: Why I'm glad I left the bicycle industry

Shared with Your friends

I currently own three bicycles.

(My health has made it harder for me to ride often, but I still love bicycles and probably will forever.)

 

-- 1999 Rivendell All-Rounder. The bike I ride most often. It has the greatest grocery capacity with a big saddlebag and front basket, and it shows its 25 years of honest wear beautifully.

 

-- 1988 Peugeot Orient Express. I got this a couple years ago because I'd been looking (for almost a decade) for an Orient Express in my size and this was what the universe offered.

 

-- 1960s Cape Cod converted into a singlespeed city bike. I love singlespeeds and have enjoyed building up and riding this one. Sadly, my knees are letting me know that singlespeeds may no longer work so well for me, and I am preparing to sell it soon.

I share this here because I've just come across an article that beautifully explains what I think of the direction bicycle design and the bike industry have taken. 

 

I was planning on leaving anyway in 2012 because my hands were taking a beating and my body could no longer handle ten-hour days at a repair stand. (Non-mechanical events at the shop forced me to leave sooner than I had planned, but it was coming before the next busy season regardless.)

 

As this article confirms, I think I left just in time, before things got silly and worse.

See for yourself. And understand why none of my bicycles use newer designs and materials.

Bits and pieces: updates

1. After trying some ergonomic grips on the All-Rounder and liking the additional support they offered, I went ahead and found some for my Peugeot as well.

These corky rubber grips by Asti/Shorex are a nice, more affordable alternative to the Ergon GP-1 grips which retail for over $40 even on Amazon. Yes, they’re made in China. And they cost less than half of what the CP-1’s cost. Now that I am unable to work very much and find myself on a very tight budget, I will get what I need for as little as possible in order to be able to ride my bike.

They have a slightly larger diameter than the used set of ergo grips I found for the All-Rounder, which may actually be beneficial for my arthritic hands. (According to my OT, a larger diameter grip means I don’t have to bring my thumb and forefinger as close together to maintain a grip, which can ease some of the strain and pain.)

2. Remember that funky saddlebag rack I got, then cleaned up and had powder-coated? Well, it works far better on a road frame than on my ATB frames, so I’m letting it go cheap. US shipping only please. I’m asking fifty bucks because it’s cool, vintage and British. Even at that price I’m eating much of the powder-coating cost and you’re getting a heckuva deal. Reach out to me if you’re interested.

3. I hope to start volunteering a couple times a month at Bike Farm now that Passover is behind me. My task will be to show up during an evening open shop period and be available to answer questions and talk someone through a repair as needed. (The idea is that I talk them through in order for them to learn hands-on, and because I can’t really do the repairs myself anymore.) First and third Tuesday evenings for Alphabet Night. Come in, say hi and give the Bike Farm a little love in the form of spare change.

It will be nice to lend some support based on my knowledge and experience, even if I cannot parlay that into paying work anymore. I still love bicycles and their elegant technology and this is a nice way to give something back.

4. Later this spring when the weather warms up, I will be selling off pretty much all the rest of my shop tools and accessories at a discount. I may wait until there’s another swap meet, pay for a little table space and offload them there. But if there’s anything you’re looking for specifically, reach out to me now and ask. I am more than happy to see if I have what you need and let it go separately. The time has come when I can’t really do significant work, even on my bikes, anymore. 

I think that the first time I have to pay a shop to fix a flat it will positively gall me. Looking at it another way, I’ve paid my dues and then some, and it might be nice to pay younger hands to lavish some love on my bike. The jury’s still out on which perspective shows up when the time comes.

5. After unsuccessfully trying to sell my singlespeed, I’ve decided to hang onto it for another year. I’ll put some ergonomic grips on it, and since I’m going mult-modal (bike and bus) a lot more often, it could be the right bike for trips in town where I don’t have to bring groceries home.

It’s spring. Happy riding!

Nobody asked for them.

Here’s a great article by Eben Weiss, aka Bike Snob NYC:

https://www.outsideonline.com/culture/opinion/disc-brakes-took-over-the-cycling-world-heres-why-that-was-a-mistake/

In it, he makes all the reasonable arguments against an entire bicycle industry dropping older technologies in favor of promoting the false idol of “racing trickle-down.”

And if you like that one, here’s another: 

https://www.outsideonline.com/culture/opinion/theres-no-good-reason-to-buy-a-carbon-bike

Again, same thing. The bicycle industry insists on infantilizing consumers by presuming they know what’s best, rather than the people who ride the damned bikes every day.

The last time I dared to question this attitude deeply, I was still working in the bicycle industry and I got my head handed to me on all sides — entirely by men, by the way — because in poo-poohing the 650b renaissance, I had somehow blasphemed the bicycle industry gods.

I built up a 650b test bike for Kogswell twenty years ago. Matthew (of Kogswell) had asked me to be part of the testing group because all his other test-builders were tall guys, and he needed someone shorter to fill out the sample group. I learned a lot from the process, and I’m glad to have done it. But in the end, I simply was not tall enough or big enough to notice a meaningful difference from n ride quality between 650b and my standard, go-to tire size of 26”/559. After the testing was finished, I sold my Kogswell to someone else and went back to my 26’er bikes with no regrets, and watched from the sidelines as two men with considerable social capital proceeded to bully the entire bike industry to invest deeply into 650b. My shop bought some tires, but we never sold very many. Our customers, living on smaller budgets and riding mostly older bikes, didn’t need another t wheel size to devote garage space to. (Rivendell Bicycle Works, which made my 26’er All-Rounder back in 1999, no longer makes frames to fit that wheel size. Too bad. However, they have yet to make a bike with disc tabs, so I mostly forgive them.)

The hard, ugly fact is that racing trickle-down is what helps to pay for the juggernaut costs of racing bike and component development and production. And racing is what gets the company name out in front of the media, not some old fat lady peddling her city bike at 10mph on her way to the store.

Which is a big part of why this old fat lady no longer shops at bike stores for anything new, and why she has a supply of overhauled freewheels on hand to see her out.

Can’t afford the new and shiny stuff? Don’t worry. There are plenty of used bikes and parts out there at downright cheap prices. Relax, and go ride your bike.

Kickstand swap.

For about ten years I’ve been using a center-mount kickstand on the Rivvy. It wasn’t ideal, but the bike was more stable this way. I didn’t want to use a two-legged center-mount kickstand because of the added weight; I don’t carry stupid-heavy loads anymore and it would’ve been overkill. Plus, they’re expensive.

Then I came into a used rear-mount kickstand that would give me the stability I wanted without further risk to the chain stays near the bottom bracket shell. So I swapped it in.

(Pro tip: determine the contact points on your rear triangle, and give those a few wraps of cloth tape to protect the paint and give the mounting bracket a good place to grip.)

I had to remove the rubber tip from the old kickstand, which required some cutting through super-glue.

The rubber tip adds a few mm of height to set the angle where I’d like it, and protects the metal end from scraping against the sidewalk and wearing down. I didn’t have a spare, so I rescued the old one. They’re meant to fit the Pletscher or Greenfield kickstands, and you can buy them at any bike shop for about $3.

After removing the rubber tip, I installed it on the replacement kickstand. Because of the cut I’d had to make to get it off, I applied super glue and then wrapped a zip tie around it to hold it in place while the glue dries. Eventually, I ,Amy fill in the split with either more super glue, or some plastic resin. But right now it seems to hold together fine on its own. I’ll probably leave the zip tie alone.

Wayback Bicycle Machine: on thrift and common sense

I came across this article in an old Bridgestone Bicycle catalog. Written by Peter Egan, who would go on to work for a time at Rivendell Bicycle Works, it makes as much, if not more, sense today as it did in 1994. Enjoy it, and then go ride your bike.

Bike Farm needs some love. You can help.

I’m going to start helping out a couple times a month at Bike Farm, to get out of the house and not focus on my own stuff for a little while.

The Bike Farm is a workshop that allows people to rent tools and bench space, and learn how to repair their own bicycles. The shop is volunteer-run and depends on donations from the public as well as volunteer hours. 

If you’d like to find out more, check out their website: https://www.bikefarm.org/

Peugeot saddlebag support UPDATE

After trying the first saddlebag support rack on the Peugeot and finding it wanting, I swapped it over to the Rivvy, where it still needs adjustment but is working better there.

I went looking for another one and found it at the Bike Recyclery, a Portland shop dealing in vintage bikes and parts. The maker was unknown, suspected to be Japanese, and seemed like a far better shape and a better attachment design that might work, so I gulped and sprang for it to the tune of thirty bucks. (Though when I consider what I spent on buying, shipping and powder coating the English rack that’s now on the Rivvy, this may have been a bargain. Don’t tell my partner.)

Today I installed it on the Peugeot. And I learned two things: first, these cool, old saddlebag support racks are designed to work on road frames, where these less space between the seat stays and the rear wheel and between the rear wheel and the installed rack. Secondly, those design characteristics mean that any vintage support may work, but will look a little odd on a mountain bike, even an older one.

Still, I forged ahead. And along the way, I had to do some cutting and filing in order to accommodate the frame’s rack eyelets because I didn’t want to cut them off. It took some doing, but in the end I made it work. Again, it’s not a perfect fit, and it won’t be on a mountain bike, but it makes me happier than the previous rack did.

 

Getting the clamps to fit inside the space between the sear stays and above the brake cable hanger was a tight fit. Squeezing the ends together hurt my hands and I had to try several times before I was successful.

Then I had to remove the rack and cut and file space to fit around the frame’s rack eyelets, which I didn’t want to remove in case I wanted to use a full-sized rack later on.

The aluminum alloy rack came slightly bent out of alignment, and I had to be very careful about how much pressure I used to realign it so I didn’t break it. In the end, with several adjustments in a well-padded bench vise, I got the lower half of the clamps to properly align. If I want to bring the upper half of the clamps into better alignment I might have to use a hammer and punch, after zip-tying the lower halves into place and letting the outer-pushing spring of the rack do its job, I find that it’s holding solidly enough for now. I’ll add thicker zip ties to the top halves if I think it’s needed.

If I tie the rear of the bag to the seatpost and close the bag, it sits well enough on the support that the support actually makes sense. If you look closely at the first photo, you’ll see that the end of the rack flares up just slightly, a nice touch that helps keep the bottom of the bag from rolling off the back of the rack. A coroplast stiffener inside the bottom panel of the bag may help reinforce that aspect. I’ll cut and install that tomorrow and see if it does.

Let’s do something stupid: Ladd’s 500

IT. IS. ON!

Ladd’s 500 returns for another day of bicycle mayhem.

Saturday, April 13 at Ladd’s Circle.

“Let’s do something stupid!”

Here’s the deal. Every year this event has grown in popularity, and every year the cost of putting it on has risen. David Robinson has been throwing this party out of his own pocket since 2016, but with permit costs rising upwards of $1200 (!!) it’s not feasible to keep expecting one guy to do all the heavy lifting.

So I’m going to suggest that, if you plan to show up to ride or watch, bring a few dollar bills with you, ask around for David (he’ll be in the middle of the circle with several hundred other people), and press the cash into his hand as a thank-you for all his hard work, and to help defray his out-of-pocket costs. 

See you on the 13th.

Bike Happy Hour and getting my bearings again

#bikehappyhourpdx tonight was awesome. 

Hung out with a mix of new and old friends, excellent fries and fabulous #bikeogling — plus a sweet invitation to put my bicycle knowledge to work as a volunteer at @bikefarmpdx ! James from Bike Farm assures me I wouldn’t have to turn wrenches, and that I can talk someone through a repair and help them learn how to do it

I think I’m gonna take them up on the idea.

As long as no meetings are involved. 🤣

If you live in Portland and haven’t yet been to Bike Happy Hour, make it a Wednesday evening destination soon! You’ll find all kinds of bicycles to ogle, delicious food and drink, and some of the nicest folks around. Sometimes it’s just casual conversation, other times Jonathan (Maus, your host and founder of BikePortland.org) will invite local bike geeks on government and advocacy to come and field questions about bicycle transportation policy. It’s often interesting, and always fun.

And next week, I hope to gather some donations of stainless steel water bottles, to wash and regift to Blanchet House to hand out to people in need who are living outside. I’ll post on Facebook to remind people early next week, but feel free to spread the word yourself.

Happy riding, and see you next week at Happy Hour.

Wednesday evening - Bike Happy Hour?

Who wants to meet up tonight at Bike Happy Hour?

I’ll be there from 3 til around 5-5:30.

Also, I’ve lowered the price on my singlespeed city bike, from $300 down to $225.

Here’s a photo dump of bike content.

Happy hump day!

FOR SALE in PDX: Deeluxe Singlespeed city bike! LOWER PRICE

As much as I have enjoyed this bike, the time has come where I can no longer pedal a singlespeed bike.

My knees simply cannot handle it anymore.

So as of today, it’s for sale.

Steel frame, 21” c-t, top tube 22” c-c. Ideal for someone between 5’ 6” and 5’ 8” tall.

Singlespeed with freewheel and hand brakes.

Converted to 26”/559 wheels with long reach calipers.

Special additions include Brooks B-17 saddle, PDW Bodega Basket, Karrimore saddlebag, Misfit Psycles handlebar. I could take these off and sell separately, but together they really complete the bike.

Upright, comfortable ride, perfect for around town riding.

Conversion and overhaul was done by a professional shop mechanic.

As it sits, I’d like $225 cash. NEW LOWER PRICE

If you want, I can swap in cheaper saddle and remove basket and saddlebag for less money.

PM me for a meetup.

Rack swap

Rack swap on the All-Rounder, after a nice slow ride in the sunshine.I’ve shored up the washer situation to spread the torque over a larger surface area and preserve the original bolt recesses in case I decide to put everything back later. 

The rack isn’t perfect for so large a bag but I think it’ll work well enough.

The previous rack will go with my Burley Travoy cargo trailer, which I plan to sell this spring. I don’t plan to haul anything that heavy anymore.

Happy riding.

Bike Happy Hour

I went.
I went multi-modal because I knew I couldn't ride the whole way there without suffering.
It was nice to get outside and socialize with folks I mostly did not know, though I also saw a few old friends. Jonathan Maus (our host) was thrilled at the turnout, and held forth about this and that thing and candidate in the upcoming election, where we will chosoe a new, more representational City Council and Mayor. I was more involved in a conversation about how we will all need a very long time -- perhaps a generation or more -- to really process the number that Covid did on us individually and collectively.
I stayed for about ninety minutes and could feel my energy draining, so I left, riding all the way to Lloyd Center before tossing my bike on the bus to get up the hill.
Whenever I stopped to catch my breath, I looked up at the sky, which was the most beautiful thing I saw this evening. Portland skies are often beautiful during the rainy season, so I made it a point to notice.
It was cold.
My knees hurt, most likely from the cold and from not having ridden very much.
My hands hurt whenever I leaned too hard on the handlebars or when I applied the brakes.
I could feel how out of shape I'd become over the last five years.
Quite frankly, Covid had done a number on me, too, and it was highly unlikely that I'd get most of my fitness back.
When I got home, I was tired and melancholy and achy.
Tonight is my second night with the CPAP machine, and I understand it could take several days or more to grow used to it.

I feel positively assailed these days by so much change and I don't like it.

I'm glad I could still ride my bike, but it was such a hard won moment of victory that I'm paying for with achy knees and a tired spirit.

I hope things will improve when the weather warms a little.